Archive for category: Thermographic imaging

You are here: / Thermographic imaging
Infrared Consulting Services thermographic scanning

How Does Wall Moisture Develop?

in , ,

Moisture problems in a building can be a huge issue for businesses. The problem with moisture is you sometimes don’t even know it’s present until it’s too late. Once mold and mildew start forming, you could be dealing with significant repairs and potential health issues for yourself and your employees.

The good news is regular thermographic scanning can detect areas where wall moisture is present. This allows you to address the area before it gets worse and causes significant issues. How does wall moisture really develop and what can you do to prevent it? Here are some facts and points to consider.

Poor Construction or Drainage

Many infrared inspection services realize wall moisture is simply a result of poor construction, especially in the drainage system. Some structures simply aren’t built to handle water drainage, no matter how structurally sound they are. This is one of the reasons why infrared thermography testing is critical before purchasing or leasing a new office space. When water sets in certain areas, especially on the roof of a building, wall moisture is inevitable. Thermographic scanning plays a large role in identifying large-scale issues that could lead to wall moisture at some point.

Cracks or Holes in the Wall

Any time you have cracks or holes in your wall, there’s a huge risk of moisture intruding. Moisture could hide in between the walls for a long time before you ever notice an issue. However, when you do an infrared thermography scan, thermographers will be able to detect the presence of moisture because of the temperature difference in certain areas. When these areas are identified, you can address the crack or hole immediately to prevent mold growth or other larger issues.

Humidity and Heat

If your building is in an extremely hot and humid environment, you always have to be concerned about moisture developing where it shouldn’t be. When you combine moisture with heat and small spaces, you’re sure to develop mold and other issues requiring extensive repairs.

The good thing about infrared inspection services is the IR technology can quickly and easily identify areas where moisture is present. This could be on a roof, in walls, in a basement, HVAC systems or anywhere else you normally don’t look. Humidity and heat are uncomfortable to begin with, but the combination can also lead to tough consequences for your business if it leads to wall moisture.

Infrared Consulting Services is the leader in providing the best thermographic scanning services in the industry. Our certified thermographers can not only detect wall moisture, but can also help you identify the root of the issue so it won’t occur again. Be sure to contact us to set up an appointment or to learn more about our services and how we can help your business.

Infrared Consulting Services benefits of Infrared Inspection

How Infrared Thermography Can Keep Your Facility Cool This Summer

in ,

The summer months are upon us, meaning temperatures are going to be on the rise and HVAC units will be working overtime. Facilities struggle with high energy bills every summer because the AC unit is seemingly operating non-stop. What many business owners don’t realize is they are wasting a lot of energy due to air leaks, poor insulation and other issues. These cause HVAC units to work harder than they have to, which drives up energy bills.

Certified thermographers can help facilities stay cool all summer long and also potentially reduce the cost of energy bills. By identifying holes and leaks in your facility with infrared technology, you’ll be able to enjoy the coolness of being indoors without breaking the bank. Here are some reasons why infrared problem prevention is the way to go.

Identify Air Leaks

One of the main benefits of infrared inspection is identifying air leaks. These leaks could be coming from the roof, walls, ceiling, windows, doors, insulation or anywhere else. Regular building maintenance checks sometimes won’t be able to detect these leaks because they are so small and are in areas where the naked eye can’t see.

When you hire certified thermographers, they will be able to detect temperature differences on all of the potential problem areas. You may be surprised at how much air is leaking out of your facility on a regular basis. Once these air leaks are identified, you can take the necessary steps to plug them up so all of your cool air will remain inside.

Keep HVAC Units Operating Efficiently

HVAC units will work hard during the summer months whether you have air leaks in your building or not. The harder the units work, the more potential issues they will have due to faulty or worn out components. It’s important to do an infrared problem prevention check on your HVAC system frequently, and especially throughout the summer. Working hard and working efficiently are two different things, and you’ll definitely notice the difference on your energy bill when your unit is working efficiently.

Check Voids in Insulation

One of the most difficult things to see is whether the insulation in your facility has any damage. Moisture could have intruded through the walls or roof and damaged the insulation, making it essentially ineffective in some areas. These are the types of issues certified thermographers look for when they conduct an infrared inspection. Faulty insulation leads to indoor air escaping and making the building hotter during the summer. The trickle down effect of poor insulation could lead to big energy bills and equipment replacement costs later on.

At Infrared Consulting Services, we know businesses operate better when working under ideal controlled conditions, so we want to help. Be sure to contact us to see how our certified thermographers can help keep your facility cool all summer long.

Infrared Consulting Services thermographic scanning

A Quick Guide to Building Envelopes

in ,

A building envelope is literally the part of a building you can draw lines around. The components include the walls, roof and foundation. These are obviously the most important components of any structure, but they are also the most overlooked. Many people take the building envelope for granted and don’t give it the proper attention and care it needs to keep people safe and comfortable inside. Since the parts of a building envelope take the most abuse from weather and other natural elements, infrared inspection services are often called to conduct an inspection. Here is a quick background on building envelopes.

Different Components, Same Goals

While there are three different components to a building envelope, they all have the same goals. Those goals include keeping cool or warm air inside, preventing water penetration, stopping air from entering in from the outside and drying out after rain to prevent mold and rotting. When any of these three components are compromised for any reason, thermal imaging services can be used to determine the severity of the damage. Sometimes property owners may not even realize the damage to the building envelope, so thermal imaging services can also be used to prevent disasters from occurring.

Challenges With Protecting Building Envelopes

You can’t completely protect a building envelope. Weather and natural disasters occur all the time, so the main thing you can do to protect a building envelope is to maintain it as much as possible, including preventative maintenance. Even if the building is in a climate where harsh weather doesn’t occur often, it is still exposed to sun, wind and rain at the very least. All of these elements could combine to wear on a building envelope over time, and thermographic scanning can help detect those areas that are worn down.

How Infrared Technology Benefits Building Envelopes

Due to the importance and function of a building envelope, it’s critical to conduct regular thermographic scanning through professional infrared inspection services. Some issues with the building envelope can’t be seen with the naked eye, but infrared technology can detect potentially serious issues before they become a big factor. Building owners may not be aware that moisture is present in the roof or in the walls. There may even be a slight air leak in those areas as well. Being aware of these issues before they become a large problem will help keep building envelopes healthy and stable for the long-term.

Infrared Consulting Services has over 30 years of experience dealing with and preventing issues related to building envelopes. Our experienced and certified thermographers will be able to identify issues before they become a big headache for your company. For more information on the importance of maintaining a building envelope, or to book your thermographic scanning appointment, be sure to contact us.

Infrared Consulting Services infrared detection technology

Are Infrared Windows the Thing of the Future?

in ,

Anyone who deals with maintaining electrical systems has likely heard of infrared windows. However, since these windows aren’t widely used, some professionals don’t know much about them. As the world of infrared detection technology continues to evolve, the use of infrared windows is expected to become more popular. These windows allow thermographic imaging professionals to do their jobs more efficiently, accurately and also save businesses money on their inspections. Here are some of the main reasons why infrared windows may be the thing of the future.

How Infrared Windows Work

Most electrical components are covered by metal or another solid material. This presents a challenge for infrared inspection services, since they need a clear line of sight in order to effectively use their equipment. These covers are necessary from a business safety standpoint, but they also come with great risks to thermographers during the infrared scan.

Infrared windows are known as the solution to this problem. The thermographers will no longer have to spend time removing panels and covers and putting them back on afterward. The infrared window has either a plastic or metal frame and supports an infrared transmissive optic, with a cover to protect the optic when it’s not needed.

Placement of Infrared Windows

It’s important for all electrical enclosures to have an infrared window. When infrared inspection services come into a business to conduct a survey, they need to have access to all equipment. Having an infrared window installed on each of the enclosures will allow the thermographer to get the thermal images they need quickly so no time will be wasted. 

However, installing infrared windows isn’t cheap, and the cost can add up depending on how many electrical enclosures you have. If your business is forced to limit the amount of infrared windows you can install, choose the enclosures that are difficult to open, have different safety hazards and need frequent inspections.

Benefits of Infrared Windows to Businesses

It may seem like infrared windows are only beneficial to infrared thermographers. That is true from a functionality standpoint, but businesses can also benefit from them. If your entire shop or workplace has infrared windows on each electrical enclosure, you could reduce the time spent on your infrared inspection significantly.

One of the main reasons why a thermographic imaging inspection takes so long is because the thermographer has to remove covers in order to get a clear view of the equipment to inspect. The quicker the process takes, the more money a business saves. Plus, the accuracy is going to be much higher with each inspection since there are no obstructions with the infrared windows.

Infrared Consulting Services has over 30 years of experience in the industry and knows exactly how to help your business save time and money. Be sure to contact us to learn more about infrared windows and to set up an appointment for your infrared testing needs.

Infrared Consulting Services thermography inspection

Covers and Panels: Should They Really Be Taken Off?

in ,

One of the main challenges thermographers face during infrared electrical inspection procedures is having to remove protective covers and panels housing the equipment. While these panels are necessary from a work safety perspective, they can cause problems during a thermography inspection.

Infrared technology works more effectively when there is a clear line of sight to the equipment. When thermographers have to take the time to remove panels and covers, it takes them longer to complete the inspection, which costs businesses more money. But how necessary is it really to remove the panels? Read on to find out the importance.

Find The Source of the Problem

Thermographers can get decent images when they bypass the process of removing covers and panels. Essentially, they can see if there is a potential issue or temperature difference, but it’s virtually impossible to determine the source of the issue. Once the panel is removed for the thermographic imaging equipment, you will get a clearer picture of the underlying issue. This allows for more targeted repairs at the actual source of the problem rather than guessing at what may be causing the issue.

Cost Savings of Keeping Covers and Panels On

The longer an infrared electrical inspection takes, the more money a business will have to spend on the survey. This is one of the reasons why companies tell the thermographers to leave the covers and panels on and do the best job they can in order to save money. While this is a good short-term money-saving technique, it can obviously lead to much larger issues in the long-term.

Since thermographic imaging technology has to be clear of obstructions to be completely effective, thermographers can’t do their jobs to the best of their ability when they are limited. When companies choose to take shortcuts by not removing covers and panels, they are actually putting the business at greater risk of electrical fires and equipment malfunctions later on.

Precision and Accuracy is Critical With IR Testing

Every thermographic image taken by a thermographer tells a story about a particular piece of equipment. Without a clear view of the equipment, thermographers have to guess at what is happening in a certain situation. The main solution is to remove the covers and panels to ensure there are no obstructions so clear thermal imaging can be taken.

Another alternative businesses are choosing is to install infrared windows. These windows allow thermographers to do the most effective job without having to take the time to remove panels and covers. Companies will have to spend some money upfront to install the infrared windows, but the windows will pay for themselves over time after several inspections take place.

Infrared Consulting Services knows exactly how to be most efficient and effective when it comes to a thermography inspection. To learn more about how infrared technology works, or to book your inspection appointment, be sure to contact us.

infrared thermography

What Affects Cost of an IR Low-Scope Roof Scan

in

The cost of maintaining a commercial low-slope roof can be quite expensive over its lifetime. The exact cost depends on a variety of factors, including preventative maintenance practices, weather elements, and others. You can always reach out to infrared consulting services to get a better idea of the cost of getting an infrared thermography scan, but it is must cheaper than replacing the entire roof.

The worst thing any business owner can do is wait until there is a problem with the roof before addressing any issues. Getting ahead of the game by detecting issues before they become larger problems will help reduce maintenance costs on your low-slope roof in the long-term.

Early Intervention Can Reduce Maintenance Costs

You can’t intervene on commercial roof issues without the help of IR thermography, in most cases. Very rarely do people spend a significant amount of time inspecting a roof on a daily, weekly or even monthly basis. Inspecting your roof daily isn’t necessary, but having the proper equipment to identify issues is critical.

That’s why IR thermography is used. This technology can identify a potential problem before the human eye can see it. When small problems become a large problem, the cost of the maintenance will rise. Infrared technology helps reduce the overall cost of roof maintenance since the issues identified can be fixed at an earlier stage.

Neglected Issues Can Make Cost Rise

If you don’t use infrared thermography on your roof, then you could be neglecting potential problems and not even know it. You may notice the water isn’t draining very well off of the roof during a rainstorm, or you may see water stains on the ceiling inside the building. Failure to address these issues right away will only lead to higher repair costs. Sometimes the issue is an easy fix, but many times it’s just getting worse by the day. Neglecting roof issues is the number one way to make the overall cost of your roof rise.

Schedule Regular Infrared Inspections

The best way to keep a budget on your commercial roof repairs is to conduct regular and frequent IR thermography inspections. This preventative maintenance strategy will essentially pay for itself when you compare it to the potential cost of roof repairs or a replacement.

Plus, a healthy roof can help reduce energy bills since the insulation will remain intact longer. There are many benefits a business owner will gain out of having a well-maintained roof, but those benefits may be non-existent without the proper use of infrared technology.

Infrared Consulting Services has been in business since 1988 and has helped thousands of businesses save money on their commercial roofs in the process. With the best-certified thermographers in the industry, you can ensure you’ll receive quality service to extend the life of your low-slope roof. Be sure to contact us for an evaluation and to start managing the cost of your commercial roof.

baseline roof moisture survey

Why You Need a Baseline Roofing Moisture Survey

in

A baseline roofing moisture survey is an essential part of determining whether a newly constructed building was properly built. With a commercial roofing thermography test, you will be able to see areas of weakness that could potentially cause problems later on. Some of the issues detected by the commercial roof inspection may not require immediate attention, but it will give property owners something to keep an eye on as the years go by.

Set the Foundation for Future Surveys

Doing a baseline roof moisture survey will establish the current condition of the building, so future roof moisture surveys can be based on the initial one. One of the benefits of infrared inspection is you can keep the surveys and easily compare them to one another over a period of time. An issue may not look too bad five years from now, but when you compare it to the baseline roof moisture survey, you may determine the condition has gotten progressively worse and can take appropriate action to prevent further damage.

Importance of Knowing The Current Condition of the Building

When you know the current condition of the commercial building, you can make a more informed decision about whether you want to purchase it or lease it. If the commercial roof inspection shows some concerns about the viability of the roof, then you can reconsider your decision. Many people and businesses don’t think much about the roof since it’s out of sight.  Neglecting to give this important part of a structure the attention it deserves can cost a business owner a lot of money when moisture starts to penetrate their roof.

Finding an Issue Upfront is Better Than Later

A baseline roofing moisture survey is also helpful from an infrared problem prevention standpoint. In many cases, you’ll be able to detect a problem before it even occurs, which will save time and money later on. If a certain issue doesn’t require immediate attention, then at least you know there is a potential problem on the horizon and can monitor it closely. Sometimes you’ll need to have more frequent surveys in those cases to ensure the problem doesn’t get to the point where the roof begins leaking.

Save Money Down the Road

A commercial roof inspection is a bit costly, but the cost is minimal compared to the potential cost of the damage roof moisture can cause. Once moisture gets through the roof, it could get into insulation, HVAC systems and anywhere else to cause major problems. In other words, it’s usually not just a leak you have to fix when you find it.

Infrared Consulting Services has helped clients with their baseline roof moisture surveys for many years. Most surveys come back positive, but we have also helped clients save a lot of money by identifying potentially large issues. Feel free to contact us to inquire about a baseline roof moisture survey for your commercial building.

thermography inspection

IR and OSHA: How Infrared Testing Improves Worker Safety

in

The Occupational Safety and Health Act (OSHA) was adopted to keep employees safe at work, especially those working in manufacturing plants or with high voltage electrical equipment. Many companies use infrared testing to avoid costly shutdowns and to prevent equipment from becoming faulty, but in some cases, IR testing is also a standard for OSHA. Infrared inspections and OSHA are both designed with worker safety in mind. Plus, infrared inspections are beneficial to companies from a cost standpoint. Check out these ways a thermography inspection can keep your employees safe and costs low:

Prevents Dangerous Problems

Infrared problem prevention is only possible with regular IR testing. Many times, a maintenance professional can’t detect certain issues before they become big and potentially dangerous problems. When it comes to electrical equipment, a small failure may produce devastating results, whether it’s from a business or personal injury standpoint.

There are no benefits to what happens with an electric systems failure, so why wouldn’t companies be proactive in preventing problems from happening? OSHA requires regular maintenance to be performed to keep workers safe, and infrared testing plays a big role in this maintenance.

High Safety and Health Standards

The safety and health standards developed by OSHA are only intended to protect employees while they work. When companies hire certified thermographers to conduct regular thermal inspections, the necessary safety guidelines set forth in OSHA are being satisfied.

But simply conducting an IR thermography inspection isn’t the only thing companies have to do. They also have to act on any issues found during the testing. If there is a faulty plug in an electrical system, then the plug has to be replaced before a worker gets injured. Some machines may show signs of wear and tear that could eventually be problematic. Instead of waiting until the machine completely malfunctions and or a worker is hurt, employers have to act quickly to prevent problems.

Requires Continuous Maintenance

OSHA requires continuous maintenance in any company. It’s not required to get an infrared thermography inspection every week, or even every month, but setting a regular schedule is recommended. Not only will these regular inspections detect problems before they occur, but they will prevent serious injuries to employees.

When machinery isn’t working like it’s designed to, employees will use different methods to work efficiently and make production goals. Sometimes, these methods can be dangerous, which is why OSHA requires maintenance like infrared testing. When a potential problem is detected, employers have to act swiftly to correct the issue to prevent injury. Liability here rests with the company, not with the employee, and OSHA fines are steep.

It’s in every company’s best interest to take all the necessary steps and precautions to keep worker safety a priority. If a company takes these steps to become OSHA compliant, then they will at least be covered from a liability standpoint.

 

To learn more about OSHA and how it relates to infrared testing, contact us today.

Look for energy leaks with thermographic imaging.

Where Are Energy Leaks Most Often Found in Commercial Buildings?

in

Energy leaks are common in commercial buildings. The bad thing is most business owners don’t even know they are wasting energy and money with each passing day. What business owner or maintenance professional has the time to survey the entire building for energy leaks? Luckily, these leaks tend to collect in a few common areas. It can be difficult to detect these leaks without the help of thermographic imaging so here are the most common places to find them.

HVAC System

You may have the top-of-the-line HVAC system in your commercial building, but without frequent electrical testing and inspection, you could still be wasting energy. HVAC systems with poorly sealed ducts most commonly create energy leaks. However, you also need to frequently check your electrical connections since a corroded or loose connection could cause the system to overheat and use more energy than necessary.

Electrical Systems

Transformers and control circuits are the two main culprits of energy waste when it comes to electrical systems. Most people don’t think electrical systems can waste energy so they don’t check them. However, with the help of thermal imaging services, you can detect any sort of energy leak coming from an electrical system and prevent it from occurring in the future.

Building Envelope

The building envelope is the entire building structure, including the roof, the walls, doors, windows, penetrations and anything else. It’s nearly impossible to have a perfect building envelope so that’s why thermographic imaging is important to detect places where energy could be leaking. Any part of the building envelope is prone to leaking, but frequent maintenance could significantly reduce the amount of energy loss.

Generators and Motors

Electrical motors always waste energy. They frequently malfunction and overheat so monitoring and testing them is critical to reducing energy waste. Be sure to check all of the bearings, electrical connections, airflow and other components to ensure the energy leaks are as minimal as possible.

Energy leaks can come from almost anywhere in a commercial building. No one has the time to check these components on a daily basis as required so contact us at Infrared Consulting Services. Together, we can schedule a thermographic imaging test to help reduce the amount of energy leaks at your business.

Detect small leaks with an infrared roof moisture survey.

What Causes Flat Roofs to Leak?

in ,

Just because a roof is flat doesn’t mean it will never leak. In fact, a flat roof will leak just as much as any other roof since the determining factors are mostly the same. Small leaks can cause big problems in the short-term and long-term for many businesses. That’s why most business owners pay for infrared testing to avoid costly shutdowns. Infrared technology can confirm where leaks happen. Here are a few causes you need to be aware of.

Poor Drainage

Flat roofs require some type of drainage system in place. Water sitting on a roof for an extended amount of time can do some major damage to the roof’s structure. Eventually, the pressure from the water could cause the roof to structurally fail, or at the least, start leaking. By conducting a simple infrared roof moisture survey, you can see where your roof is vulnerable and take action to fix it.

Harsh Environments

If your business is located in an area with harsh weather, you need to take proactive steps to ensure your roof is protected. Even something as simple as high winds could cause your roof to start leaking. However, an infrared roof moisture survey can display weak spots in your roof. These weak spots could become faulty during harsh weather so you can then take steps to have those spots repaired.

Faulty Seals Around Roof Penetrations

Air vents and other penetrations may come through a flat roof for ventilation. Sometimes the seals around those penetrations need to be repaired or replaced. The worst thing that can happen is having moisture leak through those areas since electrical equipment could be nearby. In this case, you definitely don’t want to experience what happens with an electric systems failure.

Age of the Roof

An aged flat roof can easily leak, thanks to time, the sun and other elements beating down on its surface. That’s why it’s important to conduct infrared testing to avoid costly shutdowns. By performing these tests and routine maintenance, business owners will be able to determine when it’s time to repair or replace a roof.

At Infrared Consulting Services, we’ve seen it all when it comes to roof leaks. If you think you have a roof leak or just want to have an infrared thermography test conducted, contact us.